FITT Force® Pro

FAQ

• Can I connect two hoses?

  Yes, you can connect two FITT Force Pro by screwing the male end into the female end. Please be aware that increasing the length may reduce the water flow rate, so you may experience a slight drop in pressure over that length of hose. However, you should still have ample pressure to use the hose as intended. Please be sure the hose is fully extended and not partially coiled or on a reel, as that will also affect the pressure.

• Can I replace the fittings?

  The fittings can be removed and reattached, but replacements are currently unavailable for sale in the U.S.

• Are FITT hoses resistant to UV rays?

  FITT Force Pro has been studied for external applications and are able to withstand UV ray.

• Are any heavy metals used in FITT hoses?

  No heavy metals are used in the FITT Force Pro.

• Can I attach the hose to a pump?

  FITT Force Pro can be connected to a delivery pump, not a suction pump, with a maximum operating pressure of 150psi.

• Can I attach the hose to a pressure washer?

  FITT Force Pro can be used to connect water to a high-pressure cleaner.

• What happens if the product is left in an area subject to high temperature?

  FITT Force Pro has been developed and tested to work even if left in areas subject to high temperatures up to +160°F. Although high temperatures may alter the hose’s appearance, they will not jeopardize its efficiency.

• What happens if I leave the hose exposed to the sun for a long time?

  Prolonged exposure to sunlight, as well as sudden temperature variations, reduce the product’s service life. We recommend that you store the FITT Force Pro out of direct sunlight and protected against temperatures hotter than 160°F after each use.

• What happens if I leave the hose exposed to frost for a long time?

  The tests carried out on FITT Force Pro at low temperatures failed to reveal any critical effects on the product’s performance. We recommend that you empty the hose after each use to prevent residual water from freezing and store indoors during the winter months.

• Can I wind the hose on a reel?

  Yes, FITT Force Pro can be wound on a traditional reel for storage, however it’s not compatible with an automatic winder or auto reel. We recommend unwinding it completely before use to avoid damaging the reel.

• Can I use the hose on gravel or particularly rough surfaces?

  Yes, the FITT Force Pro can be used on gravel or particularly rough surfaces.

• Is the FITT hose drinking water safe?

  The FITT Force Pro is compliant with Drinking Water contact according to protocols provided by Bureau Veritas Consumer Products Services and UL Solutions. According to the tests and evaluations carried out, the Article mentioned are claimed as “Drinking Water Safe”. We suggest you run water through the hose for a few minutes before drinking.

• Can I run hot water through it?

  The FITT Force Pro can be used for water temperatures up to 100°F.

• What can I do if the hose is punctured?

  If the puncture is toward the end of the hose near the fitting, we recommend cutting off the damaged section and reconnecting the fitting.